COVID 19 - THE SHOWROOM IS OPEN BY APPOINTMENT ONLY
Peak Storm Pants X2.5 | Trousers & Shorts | WWTCC

Peak Storm Pants X2.5

£165.99
RRP: £180.00
Stock Status: In Stock
Updated for 2020 - Now made with fabric that contains recycled yarn
Twitter
Facebook
Information
The Peak Storm Pant X2.5 is a popular trouser for all types of paddling that features a twin waist and sewn in socks. Made from Peaks X2.5 mid weight Nylon fabric that uses yarn recycled from used plastics and with integrated reinforced panels on the seat, knees and ankles.  

We really like the durable feel of the face fabric while the socks are a lighter more supple fabric for comfort inside your river shoe.  It also worth looking at the way panels are put together, allowing for maximum articulation while avoiding almost any curvature.  Seam placement avoids higher stress points with a maximum of three panels meeting at any one point. This and some careful application of some production know how means less bulky intersections of the seams and therefore higher quality taping and longer lasting pants. 

The inner waist tube gives approx 7 inches of additional height to the Storm Pant with the adjustable neoprene band of the outer waist sitting 1" lower.  While this is less than some other brands we found it was still  plenty to allow for a decent overlap between jacket and pant with the braces (attached to the inner waist tube) effectively stop anything from slipping down and reducing the need for extra material to compensate for this.

Peaks DBS Ankle system is a simple velcro panel on the reverse of the ankle cuff that lines up with a corresponding panel on the DBS boot.  Your normal shoe wont be impacted by this and the cuff  will fit over a boot collar of maybe a little less than 5" in height.

The fit allows for a decent 'inside leg' length and at 6' with a 35" waist our test subject found the medium still easy to kneel and move around in, if a little too tight around the waist.  The tester would normally wear a large as a result.
 
Specifications & Features
Materials X2.5  Nylon  20m Hydrostatic head rating   5000g/m2/24s.b1 
X2.5 High denier Nylon reinforcement on seat, knees and ankles   20m Hydrostatic head rating   5000g/m2/24s.b1 
X4  Socks  20m Hydrostatic head rating  10000g/m2/24s.b1
Features Articulated cut with bent knees and seat
Fully Taped Seams
Fully taped socks with flatlocked seams 
Double waist design • Midweight X2.5 inner waist with grippy flat elastic
Aquaout outer waist seal  Velcro adjustable neoprene
Adjustable shoulder straps (mens sizes only)
DBS Ankle System
 
Peak Size Guide - Outerwear
Size  XL XXL
Chest  90 - 100 cm 95 - 105 cm 100 - 115 cm 110 - 125 cm 110 - 130 cm
Waist 70 - 80 cm 75 - 85 cm 80 - 90 cm 85 - 95 cm 90 - 100 cm
Inside Leg 70 - 80 cm 75 - 85 cm 80 - 90 cm 85 - 95 cm 85 - 95 cm

Reviews
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product